The Type 1 and Type 2 ramps do not require the sleeve collars and cup washers which were designed specifically for the Type L ramps.
The Type 1 and Type 2 ramps require 2 x galvanised 10mm diameter dynabolts 75 to 100mm long per ramp unit and 2 x M10 galvanised washers.
There are not included in the price.
The method shown above for the type L ramps can basically be applied to the type 1 and type 2 except of course there will not be any sleeve collars and cup washers, and of course you position the ramps to best suit your situation.
Radiata Pine, Untreated
Douglas Fir, Unseasoned
Radiata Pine, Seasoned H2 Treated
Radiata Pine GL8 H3 Treated Finger Jointed
Radiata Pine H3 Treated Rougher Headed F7
Radiata Pine Fascia and Eave Mouldings
Radiata Pine H3 Finger Jointed, Primed
External Cladding: Fibre Cement Sheets
External Cladding: Timber
Fibre Cement Eaves Lining
Architraves, Skirting and Door Jambs
Bagged Cement Products